FORM LIGHTING · FL0003
A focused upgrade for your Tundra.
The black projector housing brings a cleaner front-end style, a distinct white C-light and integrated LED low and high beams to the 2014–2021 Tundra.
- Left + rightComplete headlight pair
- White DRLIntegrated daytime signature
- 2-year warrantyLimited manufacturer coverage

A COMPLETE LIGHTING UPGRADE
Output, style and everyday function
Integrated LED optics
One bi-LED projector in each headlight supplies the main low- and high-beam output, with a defined cutoff and adjustable aim.
Daytime signature
A fixed white C-light outlines the housing. Connect the supplied fuse-tap harness if you want it on as a DRL whenever the truck is running.
Amber turn signals
Sequential amber LEDs sweep across the top and bottom of the lamp, then switch back to white.

ORIGINAL MANUFACTURER PHOTOGRAPHY
See the beam comparison
Unchanged FORM photographs show the pictured lamps in the manufacturer’s test setup. These are not independent BTS measurements or a guarantee of identical results on every vehicle.

Final aiming, vehicle load and suspension height affect the beam on your truck.
THE DAYTIME SIGNATURE
A closer look at the lighting functions
A fixed white C-light outlines the housing. Connect the supplied fuse-tap harness if you want it on as a DRL whenever the truck is running.

MATCH THE TRUCK AND ORIGINAL LIGHTS
Exact fitment before you order
| Check | This application |
|---|---|
| Vehicle | 2014–2021 Toyota Tundra |
| Market | USDM models only |
| Factory wiring | Use the supplied adapters appropriate to the original lamps |
| Levelling | Manufacturer specifies a connector to retain the factory electronic levelling adjustment |
| Exact part | FL0003 |
| Package | Complete left and right headlight assemblies |
THE STANDARD PACKAGE
What comes with the pair

- Left and right projector headlight assemblies
- DRL harness
- Two halogen-headlight adapters
- Two turn-signal adapters
The additional reflector-model module shown in the shared installation guide belongs to FL0002 and is not included with this projector pair.
Other lighting, bodywork and accessories in vehicle photographs are separate products.
PLAN ACCESS, WIRING AND AIM
Installation details worth knowing
Remove the grille and trim panels to access the lamp fasteners. Fit the supplied adapters to the original harness, then route the DRL fuse-tap harness. FORM specifies that this harness is required for the C-light to run whenever the truck is on, even if it had factory DRLs; without it, the C-light operates with the main beam. Test every lighting function, reinstall the trim and adjust the aim.
Read the official FL0003 installation guide
Use the instructions supplied with your exact set. Secure wiring away from heat and moving parts, reconnect all original sensors and test every lighting function before final reassembly.

EXACT PART · FL0003
Technical specifications
| Detail | Manufacturer specification |
|---|---|
| Optics | Bi-LED projector for low and high beams |
| DRL | Fixed white |
| Turn signal | Sequential amber |
| Connectors | Model-specific plug-and-play connectors |
| Aiming | Integrated screw-type adjusters |
| Finish | Black housing |
| Warranty | Two-year limited manufacturer warranty |
FORM states that these headlights meet applicable SAE, DOT, FMVSS and CMVSS requirements for road use in the United States and Canada when correctly installed and aimed. Set the low-beam cutoff on the actual vehicle.
FORM Lighting provides a 2-year limited manufacturer warranty. Coverage, exclusions and return authorization follow the manufacturer’s current policy. Keep your proof of purchase and contact BTS before removing a lamp for a suspected warranty issue.
SEE THE DESIGN
Watch the official product videos
See the exact design and the installation process in FORM’s own videos. Match the written adapter and fitment notes above to your original lights.
Official FORM product overview

Official FORM installation guide

Choose a video to load it. No autoplay. Watch the overview or installation guide when you are ready; the videos load only after you choose them.
CLEAR ANSWERS BEFORE CHECKOUT
Your Tundra projector questions
Is this one lamp or a pair?
One order supplies complete left and right headlight assemblies with the listed standard installation parts.
Which vehicle does this set fit?
2014–2021 Toyota Tundra, USDM models. Match your original lighting to the fitment and adapter notes above.
How do I choose the daytime lighting?
A fixed white C-light outlines the housing. Connect the supplied fuse-tap harness if you want it on as a DRL whenever the truck is running.
Does this require replacing separate bulbs?
These are complete integrated LED assemblies, rather than replacement bulbs for the original housings.
Should the lights be aimed after installation?
Yes. Test all functions, then aim the low-beam cutoff on the actual vehicle. Load and suspension height can change the aim.
What warranty applies?
FORM Lighting provides a two-year limited manufacturer warranty. Coverage and exclusions follow its current terms. Retain proof of purchase and contact BTS for assistance.
Projector or reflector: which Tundra page is this?
This is the FL0003 projector pair. Compare the separately listed FL0002 reflector pair if you prefer the factory-inspired reflector design. The lighting assemblies and included wiring are different.
THE FINISHED LOOK
See the design on the truck
Original manufacturer photography; other vehicle equipment is separate.

























