FORM LIGHTING · FL0002
Factory-inspired style. Full LED lighting.
Keep the familiar Tundra shape and add full LED reflector output, a clean white daytime signature and sequential amber turn signals.
- Left + rightComplete headlight pair
- White DRLIntegrated daytime signature
- 2-year warrantyLimited manufacturer coverage

A COMPLETE LIGHTING UPGRADE
Output, style and everyday function
Integrated LED optics
Dedicated LED reflectors provide low- and high-beam output inside a factory-inspired black housing.
Daytime signature
A fixed white C-light borders the upper and lower housing. The included fuse-tap harness powers it as a DRL whenever the truck is running.
Amber turn signals
Amber LEDs sweep along the top and bottom of the lamp when signalling, then switch back to white.

ORIGINAL MANUFACTURER PHOTOGRAPHY
See the beam comparison
Unchanged FORM photographs show the pictured lamps in the manufacturer’s test setup. These are not independent BTS measurements or a guarantee of identical results on every vehicle.

Final aiming, vehicle load and suspension height affect the beam on your truck.
THE DAYTIME SIGNATURE
A closer look at the lighting functions
A fixed white C-light borders the upper and lower housing. The included fuse-tap harness powers it as a DRL whenever the truck is running.

MATCH THE TRUCK AND ORIGINAL LIGHTS
Exact fitment before you order
| Check | This application |
|---|---|
| Vehicle | 2014–2021 Toyota Tundra |
| Market | USDM models only |
| Factory wiring | Use the included adapters for the original halogen or LED lamps |
| Reflector-specific module | Use the additional module identified in the shared installation guide |
| Exact part | FL0002 |
| Package | Complete left and right headlight assemblies |
THE STANDARD PACKAGE
What comes with the pair

- Left and right reflector headlight assemblies
- DRL harness
- Two halogen-headlight adapters
- Two LED-headlight adapters
- Two resistors
The standard package differs from the FL0003 projector set. Match each adapter and module to the original headlight configuration.
Other lighting, bodywork and accessories in vehicle photographs are separate products.
PLAN ACCESS, WIRING AND AIM
Installation details worth knowing
Remove the grille and trim panels, replace the headlight assemblies and connect the supplied adapters and reflector module. FORM specifies the DRL fuse-tap harness for a C-light that stays on whenever the truck is running, even on trucks with factory DRLs. Without it, the C-light comes on with the main beam. Test the lights before reassembly, then adjust the low-beam aim.
Read the official FL0002 installation guide
Use the instructions supplied with your exact set. Secure wiring away from heat and moving parts, reconnect all original sensors and test every lighting function before final reassembly.

EXACT PART · FL0002
Technical specifications
| Detail | Manufacturer specification |
|---|---|
| Optics | Integrated LED low- and high-beam reflectors |
| DRL | Fixed white |
| Turn signal | Sequential amber |
| Ingress rating | IP67 |
| Operating temperature | −40°C to 85°C |
| Connectors | Model-specific plug-and-play connectors |
| Finish | Black housing |
| Warranty | Two-year limited manufacturer warranty |
FORM states that these headlights meet applicable SAE, DOT, FMVSS and CMVSS requirements for road use in the United States and Canada when correctly installed and aimed. Set the low-beam cutoff on the actual vehicle.
FORM Lighting provides a 2-year limited manufacturer warranty. Coverage, exclusions and return authorization follow the manufacturer’s current policy. Keep your proof of purchase and contact BTS before removing a lamp for a suspected warranty issue.
SEE THE DESIGN
Watch the official product videos
See the exact design and the installation process in FORM’s own videos. Match the written adapter and fitment notes above to your original lights.
Official FORM product overview

Official FORM installation guide

Choose a video to load it. No autoplay. Watch the overview or installation guide when you are ready; the videos load only after you choose them.
CLEAR ANSWERS BEFORE CHECKOUT
Your Tundra reflector questions
Is this one lamp or a pair?
One order supplies complete left and right headlight assemblies with the listed standard installation parts.
Which vehicle does this set fit?
2014–2021 Toyota Tundra, USDM models. Match your original lighting to the fitment and adapter notes above.
How do I choose the daytime lighting?
A fixed white C-light borders the upper and lower housing. The included fuse-tap harness powers it as a DRL whenever the truck is running.
Does this require replacing separate bulbs?
These are complete integrated LED assemblies, rather than replacement bulbs for the original housings.
Should the lights be aimed after installation?
Yes. Test all functions, then aim the low-beam cutoff on the actual vehicle. Load and suspension height can change the aim.
What warranty applies?
FORM Lighting provides a two-year limited manufacturer warranty. Coverage and exclusions follow its current terms. Retain proof of purchase and contact BTS for assistance.
Is this the same as the FL0003 projector pair?
No. FL0002 uses LED reflector optics and its own standard adapters and modules. FL0003 is the separately listed bi-LED projector design. Compare both before choosing the look and installation package.
THE FINISHED LOOK
See the design on the truck
Original manufacturer photography; other vehicle equipment is separate.






















