2021–2023 Ford F-150 · factory fog-light bumper
Four pods. A clean factory fit.
Replace the original fog lights with two Morimoto 4Banger pods on each side. Vehicle-specific bezels follow the bumper opening, while adjustable SAE Wide optics put a broad, controlled beam close to the road.
- Four-pod complete kit
- NCS or HXB
- White, yellow or mixed pairs
Three simple choices
Match the fog lights your truck has now
Start with factory LED or factory halogen fog lights. This is a fog-light choice, separate from your headlight type. The LED kit includes two relay harnesses to retain the truck’s left/right cornering-light behavior; the halogen kit includes one relay harness and output splitters.
NCS
Nichia LED pods with SAE Wide optics. A lower-power option at 15.6W stabilized per pod.
HXB
Osram HX Boost LED pods with higher measured peak intensity in the same SAE Wide format. 42W stabilized per pod.
Choose the light color
- White: four white pods; 5600K for NCS or 5700K for HXB.
- Yellow: four 2700K yellow pods.
- White + Yellow: two white pods and two yellow pods, one of each per side. These are separate fixed-color pods, not color-changing lights.
Wide light, with room to aim it properly
The SAE Wide beam combines lateral coverage with a defined upper cutoff. The brackets allow up to ±6° of vertical adjustment. Aim the lights after installation so the beam stays on the road rather than shining into oncoming traffic.
Morimoto’s stabilized peak-intensity figures are measured per pod:
- NCS White
- 14,400cd · 144lux at 10m
- NCS Yellow
- 8,680cd · 86.8lux at 10m
- HXB White
- 22,400cd · 224lux at 10m
- HXB Yellow
- 14,700cd · 147lux at 10m
Made for the original fog-light openings
Fits 2021–2023 Ford F-150 models equipped with factory fog lights. It does not fit Raptor or trucks without factory fog lights. The brackets are designed for Morimoto 4Banger pods.
What comes in a complete kit?
- Four selected NCS or HXB SAE Wide pods.
- Two front bezels, two vehicle brackets and four top-mount U-brackets.
- Mounting hardware and the BAF071H input adapters/splitters.
- Two BAF000H relay harnesses for factory LED fogs, or one for factory halogen fogs.
Some adapters in the wiring pack are unused on your application. Choose the complete kit above; the brackets/subharness-only package does not include pods or relay harnesses.
Morimoto lists a lifetime limited warranty for this product; its warranty terms and exclusions apply.
See how it fits before you start
Installation includes front-grille and bumper removal, fitting the bezels and pods, routing the relay wiring and aiming the lights. The BTS guide separates the halogen and LED wiring paths and includes the manufacturer’s installation diagrams.
F-150 4Banger fog installation guide
Bracket assembly, bumper access, wiring and final aiming in one place.
Morimoto’s 2021–2023 F-150 4Banger fog installation video.
Questions before you choose
Can I switch a Dual Color kit between white and yellow?
The Dual Color package contains two white pods and two yellow pods. It is not a switchable-color pod. The supplied wiring follows the factory fog-light circuits.
Does my factory headlight type choose this kit?
No. Check the factory fog lights in the bumper. Factory LED fogs use the LED kit; factory halogen fogs use the halogen kit.
Does it retain the factory LED cornering-light behavior?
The LED complete kit uses two relay harnesses and separate left/right factory inputs to retain that function. The halogen complete kit uses one relay harness.
Will it fit a Raptor or a bumper without factory fogs?
No. BAF071 is for the standard 2021–2023 F-150 factory fog-light openings, not Raptor or a bumper without OEM fog lights.
Do I need to aim the pods?
Yes. Morimoto specifies a level surface, a wall 25 feet away and the top of the beam 4 inches below the fog-light center height. The guide shows the setup.
