2021–2023 Ford F-150
A sharper finish. From every angle.
Morimoto XB tail lights combine sculpted LED light blades, red brake and turn-signal optics, and built-in LED reverse lights. Choose a red or smoked outer lens for the look you want.

Red or smoked. Your choice.
Both choices include a complete left/right pair, plug-in wiring and BLIS mounting hardware. Where fitted, your original BLIS modules transfer into the new housings.
Distinctive lighting, day and night
Two illuminated 3D optic groups handle braking and turn signals, with an outer parking-light signature and dedicated white LED reverse lights. The housing is ABS plastic with a UV-resistant polycarbonate lens.

Morimoto lists DOT/SAE compliance for these rear-facing lamps and a five-year limited warranty. Manufacturer warranty terms apply.
Check the original tail lights first
Fits 2021–2023 Ford F-150, including supported Raptor applications, with the original equipment below. Trucks with onboard scales or load-level indicators are excluded.
Supported
- Factory LED tail lights with BLIS.
- Factory incandescent tail lights with BLIS.
- Factory incandescent tail lights without BLIS.
Not supported
- Factory LED tail lights without BLIS.
- Onboard scales / load-level indicators.
BLIS means Blind Spot Information System. These tail lights retain it when the original modules are transferred; they do not add blind-spot monitoring to a truck that did not have it.
Factory LED non-Raptor trucks also need the turn-signal configuration change shown in the installation guide. Match your original equipment before ordering.
Want more light in reverse?
The optional Morimoto Backup Boost Bar mounts above the license plate and connects to the right XB tail light. It is sold separately; the tail-light pair already includes its own LED reverse lights.

The guide includes its wiring route and the required ¼-inch bumper wire pass-through.
Plan the installation before you start
The steps depend on your original tail lights. Our illustrated guide covers the BLIS module transfer, Type 1 and Type 2 adapters, the factory LED configuration step and optional Backup Boost Bar installation.
F-150 XB tail-light installation guide
Choose the correct equipment path and follow the annotated diagrams.
Morimoto’s official F-150 XB LED tail-light overview.
Questions before you choose
Do these add blind-spot monitoring?
No. They reuse the original BLIS modules when your truck has them. Incandescent trucks without BLIS use the included Type 1 adapter, without adding BLIS.
Can I use them with onboard scales?
No. Morimoto excludes trucks with onboard scales or load-level indicators.
Is the smoked version’s light output amber?
No. The published brake, parking and turn-signal light color is red; the reverse lights are white. Smoked describes the outer lens.
Does installation require programming?
Morimoto’s manual specifies a turn-signal configuration change for factory LED non-Raptor trucks. Its Raptor and incandescent paths are different; follow the path for your original lights.
Is the Backup Boost Bar included?
No. It is an optional separate light. The pair already includes LED reverse lights.











































