A finished look above the rear window.
The Morimoto X3B combines four sculpted red brake-light optics with white bed lighting in a piano-black housing. Choose the version that matches your original cargo camera, then carry the same lighting style from the tail lights to the top of the cab.

Match the camera already in your truck.
Without camera · X3B40
For trucks without the camera in the third brake-light assembly. The centre of the lamp has a continuous bed-light optic.

With camera · X3B35
For trucks with the original camera in the third brake light. Transfer that camera and its bracket into the X3B35 housing.
This option does not add a camera. A tailgate backup camera alone is not the camera used to make this choice.
Check your original equipment.
This page covers the X3B35/X3B40 F-150 assemblies, including the 2021–2023 F-150. Morimoto also lists these parts for earlier 2015–2020 F-150 applications; the illustrated guide below focuses on the 2021–2023 build.
Raptor: the housing can physically fit, but it does not retain the separate red parking/marker function of the original Raptor third brake light. We do not recommend it as a like-for-like Raptor replacement.
Morimoto’s testing is based on US-spec vehicles. Compare the original housing and connector for your truck; this manufacturer coverage note is not a claim that every Canadian truck is incompatible.
Brake lighting and bed lighting in one assembly.
Red optics give the brake signal a defined four-element appearance. Clear rail-shaped optics supply white bed illumination for loading and unloading. The polycarbonate housing has a gloss-black finish, and the clear lens is UV resistant.
The standard assembly operates without the optional X3B01 rapid-flash module. That module is sold separately and is not included with either camera choice.
Morimoto’s X3B product overview. Follow the F-150-specific illustrated guide for installation.
Know where the connector is before you start.
The adapter connects to the third brake-light pigtail behind the rear headliner. The connector exposed immediately behind the original lamp is not the X3B connection. Our guide shows both connectors, the retaining clips and the camera transfer in the original annotated photos.
Test the brake light, bed lights and camera before exposing the adhesive gasket. The final fit uses two outer screws and centre mounting clips; do not overtighten the screws into plastic.
What comes with it.
- One X3B35 or X3B40 third brake-light assembly, selected above.
- Plug-in adapter harness and mounting provisions.
- Five-year manufacturer limited warranty, subject to Morimoto’s terms.
Your original camera transfers on X3B35. The optional rapid-flash module is separate. Morimoto lists DOT/SAE compliance for the standard assembly; that is not a blanket approval of optional flash behaviour in every jurisdiction.
Questions before ordering.
Does the camera option include a new camera?
No. X3B35 accepts the camera from your original third brake-light assembly.
Do I connect it directly outside the cab?
No. The supplied pigtail connects behind the rear headliner. Follow the photos in the installation guide.
Is the flash module required?
No. X3B01 is an optional separate accessory.
Finish the rear of your F-150
XB tail lights · XB license-plate lights · All 2021–2023 F-150 upgrades · F-150 lighting buying guide






























