MORIMOTO · 2018–2020 FORD F-150
Your F-150. A whole new light signature.
Make the front of your 2018–2020 F-150 your own. Two Bi-LED projectors and a dedicated D-Optic high-beam assist sit behind each lens, with selectable white or amber daytime running lights and cold-weather lens heating.
- Sold as a pairDriver + passenger side
- Halogen or LEDFactory-headlight applications
- Five-year limitedManufacturer warranty

A CLOSER LOOK
What makes XB Evo different
A defined beam. More high-beam support.
Two Type 1 Ishida Bi-LED projectors handle low and high beam in each headlight. A separate D-Optic adds high-beam assist.
Choose your daytime signature.
Use the included keys to select white or amber DRLs and sequential or fade-off turn signals. Both colours are features of this same headlight set.
Built-in cold-weather help.
The lens-heating system can be requested when the outside temperature is 5°C / 41°F or below. It starts off at each ignition cycle.

Explore the optical design

Manufacturer illustration of the optics in this exact headlight model. Standard drivers are supplied with the pair.

FOUR INCLUDED MODE CHOICES
Set the signature you want
Choose white or amber daytime running lights, then sequential or fade-off turn signals. Four matching pairs of keys cover the combinations.
- White DRL + fade-off signal
- White DRL + sequential signal
- Amber DRL + fade-off signal
- Amber DRL + sequential signal
Turn the truck and headlights off before changing keys. The two included extensions let you route the selector connection to a more accessible position during installation.
COLD-WEATHER DETAIL
Lens heating you request when you need it
The integrated system helps limit snow and ice buildup while driving. It is not designed to melt heavy accumulation left by an overnight snowstorm.
- Start the truck and let the welcome sequence finish.
- At 5°C / 41°F or below, flash the high beams four times within four seconds.
- Two response flashes mean active heating; one means the request was acknowledged but a condition is not met.
It resets to off each ignition cycle. Once requested, the system controls heat as conditions permit. The same four-flash command turns it off. If automatic high beams interfere, follow the manual’s instruction to switch that feature off and retry.

SEE THE MORIMOTO RANGE IN ACTION
Watch Morimoto’s F-150 product video
Get a closer look at the new F-150 headlight range. The comparison below separates what comes with each model.
Watch on YouTube. Video loads only when you choose to play; it does not autoplay.
MAKE THE RIGHT CHOICE
XB Evo or Evo Hybrid?
Both use two Bi-LED projectors per headlight. Choose by the features you will actually use.
| Feature | XB Evo · LF2-501 | XB Evo Hybrid · LF2-501Y |
|---|---|---|
| Bi-LED projectors | Two per headlight | Two per headlight |
| Additional high-beam assist | D-Optic assist per headlight | Not included |
| Daytime running lights | Selectable white or amber | Fixed white |
| Turn signals | Selectable sequential or fade-off | Fixed fade-off |
| Lens heating | Driver-activated when conditions permit | Not included |
| Welcome sequence with standard drivers | Included | Not included |
| Interior finish | Piano black and titanium | Black |
| Package | Driver/passenger pair + listed wiring + mode keys | Driver/passenger pair + listed wiring |
| Manufacturer warranty | Five-year limited | Five-year limited |
View Morimoto’s full comparison chart

The table above compares the supplied standard-driver setups. Any Hybrid welcome-sequence capability shown with optional Supercharged drivers requires those separately purchased, off-road-only drivers.
View the manufacturer beam comparison

These are manufacturer-supplied comparison figures, not lumen specifications or an independent BTS or IIHS test result. Aim the installed headlights using the manufacturer guide.

EXACTLY WHAT IS INCLUDED
One set. Both headlights.
The driver- and passenger-side assemblies are supplied together with the listed wiring. Standard LED drivers are included.
- 1 driver-side and 1 passenger-side headlight
- 2 halogen adapter harnesses
- 2 magnet-mount resistors
- 1 micro fuse tap
- 1 DRL harness
- 2 mode-selector extensions
- 8 mode selectors: 4 matching pairs
The optional LF2-DRVSC13 Supercharged driver pair is sold separately. Factory lower mounting brackets are transferred from the original headlights.
PLAN THE INSTALLATION
Know the connections before you begin
The supplied guide covers factory-halogen and factory-LED trucks. Both use the included DRL harness and fuse tap.
Factory halogen headlights
Use the two supplied adapter harnesses and magnet-mount resistors. The manual shows the side-marker, turn-signal and low/high-beam connections.
Factory LED headlights
Connect through the original headlight connector, together with the supplied DRL harness. Do not add the halogen adapter setup to the LED connection path.
- Remove the original assemblies. Follow the bumper-trim, grille and headlight-access steps for the truck.
- Transfer the lower brackets. Reuse the factory mounting brackets and hardware as directed.
- Route the DRL harness and fuse tap. The guide calls for a small notch in the fuse-box lid for the harness grommet; installation is not entirely modification-free.
- Test and aim. Check every function, secure wiring clear of pinch points, reassemble and fine-tune the low-beam aim.
Open the official installation guide
The illustrated truck is a 2019 F-150 XLT with halogen headlights. Follow the equipment-specific instructions, and use a qualified installer if the procedure is beyond your experience.

THE DETAILS AT A GLANCE
XB Evo specifications
- Product
- XB Evo · LF2-501
- Application
- 2018–2020 F-150; excludes Raptor
- Original headlights
- Factory halogen or factory LED
- Market / traffic
- North American LHD / right-hand traffic
- Optics per lamp
- 2 Type 1 Ishida Bi-LED projectors + D-Optic high-beam assist
- DRL / signal
- White or amber / sequential or fade-off
- Lens heating
- Driver-requested; conditions apply
- Interior
- Piano black and titanium
- Package
- Driver + passenger pair and listed wiring
- Warranty
- Five-year limited manufacturer warranty
Morimoto rates the standard-driver configuration for DOT / FMVSS108 output requirements. Correct vehicle fitment, installation and aiming remain necessary.
Optional Supercharged drivers: off-road use only

LF2-DRVSC13 Supercharged drivers fit these two headlight models, but raise output beyond compliant road-use intensity. They are off-road use only in Canada and the United States. They are not required for normal road use. Standard drivers must be reinstalled for road-use output; there is no claimed road/off-road toggle.
Headlights are not included with the separate driver accessory. Manufacturer percentage-output graphics are not a BTS-tested guarantee.
QUESTIONS BEFORE ORDERING
Get the fit and feature details right
Can I choose white or amber daytime running lights?
Yes. The full Evo includes mode-selector keys for white or amber DRLs and sequential or fade-off turn signals. These settings use the included keys; they are not separate colour SKUs. Switch the vehicle and headlights off before changing keys.
How do the heated lenses work?
The full Evo heater is available at an ambient temperature of 5°C/41°F or below. With the engine running and the welcome sequence complete, flash the high beams four times within four seconds to request it. It resets to off each ignition cycle. It helps limit buildup while driving and is not designed to clear heavy overnight snow accumulation.
How is this different from the XB Evo Hybrid?
LF2-501 adds D-Optic high-beam assist, lens heaters, configurable DRL/turn-signal modes and the standard welcome sequence. The lower-priced LF2-501Y Hybrid retains two Bi-LED projectors but omits those added features.
Does one order include both headlights?
Yes. One set includes the driver-side and passenger-side headlight, plus the wiring accessories listed above.
Will these fit factory halogen and factory LED trucks?
Yes. Morimoto lists both factory-halogen and factory-LED 2018–2020 F-150 applications. The included adapter harnesses and resistors are used for halogen trucks. Factory-LED trucks connect through the original headlight connector. Both use the supplied DRL harness and fuse tap.
Will these fit a 2018–2020 Raptor?
No. Raptor uses a different headlight application. These LF2-501 and LF2-501Y assemblies are for the standard 2018–2020 F-150 front end.
Is installation completely plug-and-play?
The lamp connectors use the factory connector or included adapters, but installation also includes transferring the lower brackets and routing the supplied DRL fuse-tap harness. The manufacturer guide specifies a small notch in the fuse-box lid for the harness grommet. Aim and test the lights after installation.
Can other aftermarket lights affect the turn signals?
Yes. Morimoto warns that non-OEM/non-Morimoto tail lights, side markers or other exterior lighting can cause hyperflash or interfere with sequential operation because of mismatched impedance.
Are Supercharged drivers included, and can I use them on public roads?
No. The optional LF2-DRVSC13 drivers are sold separately. They increase output beyond compliant intensity limits and are for off-road use only, not public-road use in Canada or the United States. Keep the standard drivers for road use.
What warranty is included?
Morimoto provides a five-year limited manufacturer warranty. Its stated exclusions include modifications, alterations and misuse.
PLAN THE REST OF YOUR BUILD
More lighting for your F-150
Compare the alternative headlight set, or browse lighting by the vehicle and type you need.
Unsure about your original headlights or aftermarket lighting? Ask BTS with your model year and current lighting setup.

























