MORIMOTO · 2018–2020 FORD F-150
The Evo look. The features you need.
Give your 2018–2020 F-150 a fresh front end with two Bi-LED projectors per headlight, crisp white daytime running lights and amber fade-off turn signals. Evo Hybrid keeps the choice straightforward.
- Sold as a pairDriver + passenger side
- Halogen or LEDFactory-headlight applications
- Five-year limitedManufacturer warranty

A CLOSER LOOK
What makes XB Evo Hybrid different
Two projectors per headlight.
Type 1 Ishida Bi-LED projectors provide the low- and high-beam functions in a clean black housing.
White DRLs. Fade-off signals.
The daytime running light is fixed white. The amber turn signal uses a fixed fade-off pattern, with no mode keys to choose.
A simpler way into Evo.
Hybrid leaves out the full Evo’s heater, D-Optic high-beam assist and configurable modes. Compare both sets below to find the right feature mix.

Explore the optical design

Manufacturer illustration of the optics in this exact headlight model. Standard drivers are supplied with the pair.

ONE CLEAR CONFIGURATION
White DRLs. Amber fade-off signals.
Hybrid uses fixed light functions and a black interior. The centre section is not a D-Optic high-beam assist.
If you want selectable amber DRLs, sequential signals or heated lenses, choose the full XB Evo. Those features are not included in this Hybrid pair.
SEE THE MORIMOTO RANGE IN ACTION
Watch Morimoto’s F-150 product video
Get a closer look at the new F-150 headlight range. The comparison below separates what comes with each model.
Watch on YouTube. Video loads only when you choose to play; it does not autoplay.
MAKE THE RIGHT CHOICE
XB Evo or Evo Hybrid?
Both use two Bi-LED projectors per headlight. Choose by the features you will actually use.
| Feature | XB Evo · LF2-501 | XB Evo Hybrid · LF2-501Y |
|---|---|---|
| Bi-LED projectors | Two per headlight | Two per headlight |
| Additional high-beam assist | D-Optic assist per headlight | Not included |
| Daytime running lights | Selectable white or amber | Fixed white |
| Turn signals | Selectable sequential or fade-off | Fixed fade-off |
| Lens heating | Driver-activated when conditions permit | Not included |
| Welcome sequence with standard drivers | Included | Not included |
| Interior finish | Piano black and titanium | Black |
| Package | Driver/passenger pair + listed wiring + mode keys | Driver/passenger pair + listed wiring |
| Manufacturer warranty | Five-year limited | Five-year limited |
View Morimoto’s full comparison chart

The table above compares the supplied standard-driver setups. Any Hybrid welcome-sequence capability shown with optional Supercharged drivers requires those separately purchased, off-road-only drivers.
View the manufacturer beam comparison

These are manufacturer-supplied comparison figures, not lumen specifications or an independent BTS or IIHS test result. Aim the installed headlights using the manufacturer guide.

EXACTLY WHAT IS INCLUDED
One set. Both headlights.
The driver- and passenger-side assemblies are supplied together with the listed wiring. Standard LED drivers are included.
- 1 driver-side and 1 passenger-side headlight
- 2 halogen adapter harnesses
- 2 magnet-mount resistors
- 1 micro fuse tap
- 1 DRL harness
The optional LF2-DRVSC13 Supercharged driver pair is sold separately. Factory lower mounting brackets are transferred from the original headlights.
PLAN THE INSTALLATION
Know the connections before you begin
The supplied guide covers factory-halogen and factory-LED trucks. Both use the included DRL harness and fuse tap.
Factory halogen headlights
Use the two supplied adapter harnesses and magnet-mount resistors. The manual shows the side-marker, turn-signal and low/high-beam connections.
Factory LED headlights
Connect through the original headlight connector, together with the supplied DRL harness. Do not add the halogen adapter setup to the LED connection path.
- Remove the original assemblies. Follow the bumper-trim, grille and headlight-access steps for the truck.
- Transfer the lower brackets. Reuse the factory mounting brackets and hardware as directed.
- Route the DRL harness and fuse tap. The guide calls for a small notch in the fuse-box lid for the harness grommet; installation is not entirely modification-free.
- Test and aim. Check every function, secure wiring clear of pinch points, reassemble and fine-tune the low-beam aim.
Open the official installation guide
The illustrated truck is a 2019 F-150 XLT with halogen headlights. Follow the equipment-specific instructions, and use a qualified installer if the procedure is beyond your experience.

THE DETAILS AT A GLANCE
XB Evo Hybrid specifications
- Product
- XB Evo Hybrid · LF2-501Y
- Application
- 2018–2020 F-150; excludes Raptor
- Original headlights
- Factory halogen or factory LED
- Market / traffic
- North American LHD / right-hand traffic
- Optics per lamp
- 2 Type 1 Ishida Bi-LED projectors
- DRL / signal
- Fixed white / fixed fade-off
- Lens heating
- Not included
- Interior
- Black
- Package
- Driver + passenger pair and listed wiring
- Warranty
- Five-year limited manufacturer warranty
Morimoto rates the standard-driver configuration for DOT / FMVSS108 output requirements. Correct vehicle fitment, installation and aiming remain necessary.
Optional Supercharged drivers: off-road use only

LF2-DRVSC13 Supercharged drivers fit these two headlight models, but raise output beyond compliant road-use intensity. They are off-road use only in Canada and the United States. They are not required for normal road use. Standard drivers must be reinstalled for road-use output; there is no claimed road/off-road toggle.
Headlights are not included with the separate driver accessory. Manufacturer percentage-output graphics are not a BTS-tested guarantee.
QUESTIONS BEFORE ORDERING
Get the fit and feature details right
Does the Hybrid have heated lenses or amber DRL selection?
No. LF2-501Y has fixed white DRLs and fixed fade-off turn signals. It does not include lens heaters, mode selectors or the full Evo’s D-Optic high-beam assist.
Does the Hybrid have a startup animation?
There is no welcome sequence with its standard drivers. Optional off-road-only LF2-DRVSC13 drivers activate a projector welcome sequence, but their increased output is not compliant for public roads in Canada or the United States.
Should I choose Evo or Evo Hybrid?
Choose LF2-501Y Hybrid for the two-projector Bi-LED setup with fixed white DRLs and a simpler feature set. Choose the full LF2-501 Evo if you want lens heating, configurable DRLs and turn signals, an additional high-beam assist and a standard welcome sequence.
Does one order include both headlights?
Yes. One set includes the driver-side and passenger-side headlight, plus the wiring accessories listed above.
Will these fit factory halogen and factory LED trucks?
Yes. Morimoto lists both factory-halogen and factory-LED 2018–2020 F-150 applications. The included adapter harnesses and resistors are used for halogen trucks. Factory-LED trucks connect through the original headlight connector. Both use the supplied DRL harness and fuse tap.
Will these fit a 2018–2020 Raptor?
No. Raptor uses a different headlight application. These LF2-501 and LF2-501Y assemblies are for the standard 2018–2020 F-150 front end.
Is installation completely plug-and-play?
The lamp connectors use the factory connector or included adapters, but installation also includes transferring the lower brackets and routing the supplied DRL fuse-tap harness. The manufacturer guide specifies a small notch in the fuse-box lid for the harness grommet. Aim and test the lights after installation.
Can other aftermarket lights affect the turn signals?
Yes. Morimoto warns that non-OEM/non-Morimoto tail lights, side markers or other exterior lighting can cause hyperflash or interfere with sequential operation because of mismatched impedance.
Are Supercharged drivers included, and can I use them on public roads?
No. The optional LF2-DRVSC13 drivers are sold separately. They increase output beyond compliant intensity limits and are for off-road use only, not public-road use in Canada or the United States. Keep the standard drivers for road use.
What warranty is included?
Morimoto provides a five-year limited manufacturer warranty. Its stated exclusions include modifications, alterations and misuse.
PLAN THE REST OF YOUR BUILD
More lighting for your F-150
Compare the alternative headlight set, or browse lighting by the vehicle and type you need.
Unsure about your original headlights or aftermarket lighting? Ask BTS with your model year and current lighting setup.
























