ProComp Gen3 · 2021–2023 Ford F-150 / Raptor
Two compact pods. A clear choice of beam.
Add white auxiliary lighting at the windshield corners with vehicle-specific BAF067 brackets and a switched relay harness. Choose Flood for broad nearby coverage or Spot for a more concentrated beam.
Flood or Spot: choose the coverage you need
Flood · EXP76413P
Wider illumination for nearby terrain and the sides of a trail. Manufacturer rating: 20W per pod.
Spot · EXP76414P
A narrower beam for a more focused view ahead. Manufacturer rating: 12W per pod.
Both choices include a pair of white-output pods. Blue, red, yellow and black inserts change the trim appearance; they do not change the light colour. These are off-road auxiliary lights, not replacement headlights or SAE fog lamps.
Made for the F-150 mounting points
This complete kit pairs ProComp pods with Morimoto BAF067 brackets for 2021–2023 Ford F-150 and F-150 Raptor. Check clearance around existing aftermarket hood or windshield accessories before installation. This listing does not extend that fitment to other model years.
The bracket uses existing mounting points. The relay harness uses its own switch; a factory auxiliary-switch conversion or vehicle-specific upfitter pinout is not included in these instructions.
Everything in the complete kit
- Two ProComp Gen3 pods in the selected Flood or Spot pattern
- BAF067 left/right F-150 brackets, supports and mounting hardware
- Pod mounting brackets and hardware
- ProComp relay harness and switch
- Blue, red, yellow and black trim inserts
Both choices are complete kits. There is no bracket-only or no-harness option on this page.
Mount, wire and aim with the correct instructions
Our illustrated guide separates the F-150 bracket work from the ProComp pod wiring, so the correct hardware and harness stay together.
Open the ProComp F-150 installation guide · BAF067 bracket manual · ProComp pod manual
See the ProComp Gen3 pods
Supplier-linked product overview. The F-150 mounting procedure is in the illustrated guide above.
Built for exposed auxiliary-light mounting
- Output
- White; Flood or Spot
- Housing protection
- IP67
- Finish
- Polyester powder coat
- Pod envelope
- 3.25in wide × 3.75in high × 3.1in deep
- Warranty
- Limited lifetime manufacturer coverage, subject to its terms
Warranty coverage is subject to the ProComp Promise and supplied component terms. Labor, installation costs, normal wear and damage from misuse are not covered. Retain proof of purchase and contact BTS before returning a component.
Useful answers
Is this a pair or a single light?
A complete pair: two selected ProComp pods, the F-150 bracket set, mounting hardware and relay harness.
Are the coloured inserts coloured lighting?
No. They are cosmetic trim inserts. Both beam choices produce white light.
Can I use these as my road-going fog lights?
No. The ProComp manual specifies off-road use. They are independent auxiliary lights and do not replace the factory headlight or fog-light system.
Does the kit include a factory upfitter harness?
It includes the ProComp switched relay harness. Use the supplied wiring diagram; no factory upfitter adaptor or pinout is promised.
Explore 2021–2023 F-150 lighting · Plan your lighting upgrades
